Heorot

Hand made damascus steel knives and other craft.

Menu Skip to content
  • Home
  • Knives
  • Other crafts
  • Horses
  • Blog
  • Contact
  • Twitter
  • Instragram
15/05/200703/03/2018 Simone Hindin

Final design drawings

OK – here are the house final design elevations and floorplans.

Ground Floor

First floor

Second Floor

South elevation (front door)

North elevation (garden, BBQ area etc)

East elevation (laundry door)

West elevation (from gate)

Share this:

  • Twitter
  • Facebook

Like this:

Like Loading...
  • House

Published by Simone Hindin

View all posts by Simone Hindin

Post navigation

Previous Welcome Louie
Next House’s last day plus workshop projects finished

Instagram

This pair are now ready to harden I like to have a few to make it worthwhile heating the oven but 2 will have to do this time #nzknifemaker #damascussteel #kitchenknives #twisteddamascus #multibardamascus
Here is how that fork would look in a darker wood. This one clears my backlog of forks. So if you are interested PM me. #nzknifemaker #damascussteel #kitchenknives #mysca #lochac #medieval
Again with the knife and fork sets. For some reason this one is camera shy and I either get the shape or the pattern #mysca #lochac #damascussteel #medieval #kitchenknives #nzknifemaker
Here we go again welding bolsters onto 8 inch chef knife. When I first saw this being done by #salemstraub I knew I needed to learn to do it. This is the 4th attempt and results have been a little mixed so far I think I have sheared the weld while working close by. The blade is a 6 bar composite and at this stage it is around 10 mm thick it will be forged to shape and thinned a little but to get a good pattern from all of the bars I need to grind pretty deep. Anyhow lets roll those dice and see how this goes. #nzknifemaker #damascus #kitchenknives #twisteddamascus
File work roughed out ready for heat treat these al have a lot of metal to come off yet otherwise they will develop splotches in etch. #nzknifemaker #lochac #mysca #kitchenknives #damascussteel #medieval #wip
Making some more forks. This is how i set rhem up to mark them out. I use the height guage to create a plane parallel to the surface plate and mark a centerline then I mark lines to work to. It takes a bit of adjusting to get the center in the right place but it is better to do it now while there is plenty of material. #nzknifemaker #kitchenknives #lochac #damascussteel #mysca

Recent Posts

  • Min makes saffron cakes
  • Huck towels
  • Saffron insanity
  • Dutch loose gown completed
  • Min makes hats

Tags

15th century 16th century armour blades books Churchill Cub cooking costume craft dyeing garden horses Lathe netherlands nick saffron sca simone tapestry weaving Workshop
Blog at WordPress.com.
%d bloggers like this: