Heorot

quarter horses and craft

Menu Skip to content
  • Heorot knives
  • Knives
  • Other crafts
  • Quarter Horses
  • Blog
  • Contact
  • Twitter
  • Instragram

Category: plumbing

May 19, 2008March 3, 2018 Simone Hindin

Bricks on

Instagram

I have now heat treated and ground the blades now off to the polishing area. Ok its not some much an area as a stool. I will sand to say 500 the give them a dip in the etch so as to show how the pattern look I already know because you can see it in the right light. The seax is a 400 mm blade #seax #lochac #twisteddamascus #damascussteel #sca #nzknifemaker #ballockdagger #viking
The seax is ready for a rough grind and heat treat for fun I forged a pair of bollock dagger blades from 200 layer twist. I have not forged bevels so I will get more star from the grinding. I prefer to have a few projects at different stages so that I don't spend all day doing the same thing. #lochac #twisteddamascus #seax #Viking #bollockdagger
Just cleaned the surfaces to check for pending design changes and make sure that the edge ends up on the correct side. The bar us a little long at 500 mm and it is still 12 mm thick and still needs to be forged out a little so there will be an offcut. #seax #nzknifemaker #twisteddamascus #viking #patternwelded #lochac
The 9 bars are done and ready to be forged to size yeah I know you only see 3 the others are all in to centre bar which is 2 x 3. Next steep is to pattern the 75 layer edge and ladder the second bar from the top. Then weld the bars together. #nzknifemaker #lochac #seax #viking #twisteddamascus
Now that I am over my cold I have started work on a large seax these cute little billets are the correct size for each of the bars in the core. Last tome I did this I made these twice this size and I felt that a lot of time was wasted working a very long bar of thin material that would be cit in half before twisting. There are 8 like this and 1 higher layer count for rhe edge. #seax #viking #twisteddamascus #nzknifemaker #lochac
Been feeling ill all week so all I have done is wiped this eating set clean. Hope to sharpen tomorrow. #twisteddamascus #nzknifemaker #lochac

Recent Posts

  • Dutch loose gown completed
  • Min makes hats
  • the pair of red shoes
  • Making shoes again
  • Hangings project

Tags

15th century 16th century armour blades books Churchill Cub cooking costume craft dyeing garden horses Lathe netherlands nick saffron sca simone tapestry weaving Workshop
Blog at WordPress.com.